Automatic panel bending center
Programmed blade forming and coordinated blank handling for multi-edge panels.
PROCESS OVERVIEW
How the process fits your production
A panel bender holds the blank while bending blades form its flanges. Coordinated handling and rotation can produce several edges in one programmed cycle.
- Positive and negative flange forming
- Coordinated clamping
- Programmed multi-edge cycles
- Loading integration to review
Typical applications
- Electrical cabinets
- Door and elevator panels
- HVAC covers
Material considerations
Steel, stainless steel and aluminum blanks within the proposed machine's material and geometry limits.
Select around the finished part
Confirm every return and flange against the forming envelope. Obstructions and short gripping edges require a part-feasibility review.
Prepare your inquiry
Review blank and formed-part drawings. Check flange height, minimum edges, reverse bends, surface protection and how the part is gripped and rotated.
Discuss this machine type →Technical selection requirements
Compare these fields with the proposed model's technical sheet. Material, part geometry and the configured options determine the working capacity.
| Specification | Configuration requirement |
|---|---|
| Flanges | Height, length and return-bend limits. |
| Automation | Cycle estimate and material-flow interfaces. |
| Part envelope | Blank size, bend length and flange height. |
| Material | Grade and thickness range. |
| Handling | Gripping, rotation, loading and unloading. |
| Programming | Tool adjustment and bend-sequence feasibility. |
This page describes a machine architecture. Rated capacities, delivery scope and available options are confirmed for the selected SNSIE model.
Request a model-specific technical sheet →Compare machine types
Discuss your next machine.
Share your sheet-metal processing requirements with SNSIE.