Hydraulic C-frame press
Open-front hydraulic pressing with pressure and stroke set for the process.
PROCESS OVERVIEW
How the process fits your production
Presses apply force through a die to punch, form or assemble parts. Hydraulic and crank-driven systems differ in force, energy and stroke characteristics.
- Hydraulic force application
- Open-front tooling access
- Pressure/stroke adjustment
- Cycle modes to configure
Typical applications
- Forming and shaping
- Correction
- Pressing and assembly
Material considerations
Metal blanks or coil stock with dies matched to material, thickness, lubrication and forming process.
Select around the finished part
Check force throughout the stroke and frame behavior under off-center loads. Review die and finished-part access.
Prepare your inquiry
Review die drawings, force curve, shut height, stroke and off-center load. Include feeding, scrap removal, die protection and safeguarding.
Discuss this machine type →Technical selection requirements
Compare these fields with the proposed model's technical sheet. Material, part geometry and the configured options determine the working capacity.
| Specification | Configuration requirement |
|---|---|
| Force | Hydraulic rating and pressure settings. |
| Stroke | Travel, speed and opening height. |
| Rating | Force curve, load position and available energy. |
| Die envelope | Bed, shut height, stroke and slide adjustment. |
| Production | Cycle rate, feeding and scrap removal. |
| Protection | Guards, die monitoring and overload control. |
This page describes a machine architecture. Rated capacities, delivery scope and available options are confirmed for the selected SNSIE model.
Request a model-specific technical sheet →Compare machine types
Discuss your next machine.
Share your sheet-metal processing requirements with SNSIE.